Fastrax Raceway
3340 "D" San Pablo Dam Rd.
San Pablo, Ca. 94806
Phone: (510) 222-2012
Fax: (510) 222-2214
Email: FXGEORGE@aol.com

Updated: 4/11/00

SQUAT PRECISION PARTS
Motor Components
The following,with the exception of MH93, are armature blanks. These are 
suggested only for the most advanced Fencecar racers who are familiar with 
hand winding techniques. Magnetic wire is available from Okami, check our 
link to their website. Watch this listing in the future as we may soon have 
these armatures available hand wound in the USA. 
MH84 D-cut type armature blank 5 degrees $9.95
MH68 D-cut type armature blank 7 degrees $9.95
MH69 D-cut type armature blank 10 degrees $9.95
MH80 Direct drive armature (long shaft, wheels go right on the shaft, no 
gears) $9.95
MH81 Direct drive armature 5 Degrees (long shaft, wheels go right on the 
shaft, no gears) $9.95
MH88 Direct drive armature D-cut $10.50
MH89 Direct drive armature D-cut 5 Degrees $11.95
MH88 Direct drive armature D-cut 7 Degrees $11.95
MH93 Modena armature hand wound by one of Japan's top champion racers $39.95
Chassis and Accessories
Y02 Complete chassis made of carbon fiber material, with instructions. $105.00
Y03 Stabilizer replacements made from carbon fiber for Y02 chassis. $14.50
Y04 Front stay replacements made of carbon fiber for Y02 chassis. $14.50
Y05 Rear stay replacement made of carbon fiber for Y02 chassis. $16.50
Y06 Battery terminal for Y02 chassis. $7.50
Y07 Right side stay replacement for Y02 chassis. $21.95
Y08 Left side stay replacement for Y02 chassis. $21.95
Y09 Complete replacement accessory set made of FRP for the Y02 chassis. $42.00
Y10 Endbell holder for Y02 chassis. $8.25
Y11 Motor cover plate for Y02 chassis. $9.95
Y12 Motor holder for Y02 chassis. $7.50
Y13 Center plate for Y02 chassis. $8.95
Y14 Front plate for Y02 chassis. $8.25
MH17 Stainless steel screw set (4 pcs) $2.50
MH18 Stainless steel screw set (12 pcs) $6.25
MH86 Complete direct drive chassis set made from FRP material, with 
instructions. $87.95
Batteries and accessories
MH94 Sanyo Ni-Cd 1100mAh (4 pack). $24.95
MH95 Sanyo Ni-Cd 1100mAh processed with high voltage, "zapped", (4 pack) 
$29.95
MH47 Fuji Ni-Cd 1000mAh (4 pack). $24.95
MH96 Fuji Ni-Cd 1000mAh processed with high voltage, "zapped", (4 pack) $29.95
MH77 Battery Holder for 2 batteries $6.25
MH78 Battery Holder for 4 batteries $9.49
Wheels and Tires
VE11 "Shadow" SS175 Hard plastic wheels (2), 1.6g, 17.5mm dia, 8.95mm wide 
$8.95
VE14 "Shadow" SS150 Hard plastic wheels (2), 1.4g, 15.0mm dia, 8.95mm wide 
$8.95
MH71 ZAK wheel by Mr. Yamazaki, dish type, 1.7g, 17.95mm dia, 8.01mm wide 
$9.95
MH33 Super narrow tires (4 pack) with double stick tape included. Orange 
rubber. $4.75
MH70 Wide tires (4 pack) with double stick tape included. Orange rubber, 10mm 
wide. $5.00
MH35 Precut double stick tape for tire mounting. Four sheets per pack. $1.25
SO30 Special tire glue for mounting any tires on any rims. $11.29
Ball Bearings
M01 Axle bearings (4) unflanged, shielded, lubricated. $9.95
M02 Axle bearings (4) unflanged, shielded, greaseless. $9.25
MH36 Roller bearings 6mm, unflanged, shielded, lubricated (4) $7.50
MH75 Roller bearing 6mm, unflanged, shielded, greaseless. (4) $9.95
MH46 Axle bearings (2) flanged, open. $8.95
Pinion Gears
VE13 19T Hard plastic pinion (3 pack) $5.95
VE06 20T Hard plastic pinion (3 pack) $5.95
VE07 21T Hard plastic pinion (3 pack) $5.95
VE08 22T Hard plastic pinion (3 pack) $5.95
Tools
MH53 Diamond blade for coping saw, good for cutting carbon fiber. $22.00
MH54 Mini coping saw. This is a really nice little saw! $9.95
MH55 Replacement blade for mini coping saw. $4.49