Organized Racing Programs

Fastrax Scheduled Race Programs
Every week, Fastrax offers racing programs on the slot car and Tamiya tracks. Except for our Bracket drag racing program all races are run according to classes with specific rules. After you pay an entry fee your car will go through technical inspection and impounded before the race.

The Bracket drag racing program is every Friday night on the drag strip. This program is run almost exactly like it is at the real drag strip. Give race director Bryan Pankhurst your “dial in”, and watch your lights!

Wednesday Night Novice Stock Car Racing
Time: 7:30pm - Tech Inspection, 7:45pm - Racing Begins
Track: Purple Track - "120' Kingleman"
Driver level: Beginners Only
Class: "Restricted B Stock Cars" (Stock Chinese 16D motors only)
Entry fee: $4
Prizes: Engraved plaques 1st - 10th place.
Rules: Rules will be strictly enforced. All cars will be inspected and must pass in order to race. Cars impounded until beginning of race. Restricted B Stock Car uses any 4" flexi chassis with no design modifications. Must use 1/8" axle and 48 pitch gears. Clearance rule of .063" from front to rear of car. Top of roof no lower than 1 9/16" using Parma tech tool. Motors must be stock "Made in China". Essentially this is a race for starter kit cars.

Thursday Night Advanced Stock Car Racing
Time: 7:30pm - Tech Inspection, 7:45pm - Racing Begins
Track: Purple Track - "120' Kingleman"
Driver level: Advanced/Expert
Classes: 1/32 Mini Cooper "Unrestricted B Stock Cars" (Any legal 16D motor). Super Bee (Super Wasp/Hornet)
Entry fee: $4/one car, $7/two cars, $9/three cars.
Prizes: Engraved plaques 1st - 10th place.
Rules: Rules will be strictly enforced. All cars will be inspected and must pass in order to race. Cars impounded until beginning of race. 1/32 Mini Cooper uses Parma Int. 32 chassis and Pla-Fit Cheetah motor. Must use Booth Mini Cooper body. Clearance rule of .032" front to rear. Unrestricted B Stock Car uses any 4" flexi chassis with no design modifications. Must use 1/8" axle and 48 pitch gears. Clearance rule of .063" from front to rear of car. Top of roof no lower than 1 9/16" using Parma tech tool. Motors may be fully blueprinted with any 16D set up and armature. Super Bee uses any 4" flexi chassis allowing only minimal design modifications to the rear axle height. May use 3/32 rear axle and any pitch gears. Clearance rule of .063" from front to rear of car. Any JK LeMans style body allowed cut on the cut line.

Friday Night Drag Racing
We offer Bracket racing on the Drag Strip on Friday nights starting at 8:00PM. This program is directed by Bryan Pankhurst. Bryan runs the bracket program with a round robin format using a points system so that you get a lot of passes down the drag strip. Index Classes will soon be added to the program. Bracket racing is “Run What Ya Brung” - the speed of the car, the type of motor, the type of body, etc. does not matter.

Tamiya Mini 4WD every Sunday at 2:00 PM
Separate classes for Juniors (15 and under) and Adult (16 and up) using a "touch back" 2 car pursuit race format. Unlimited entries per person at only $3.00 each. Classes are Box Stock, Tamiya Spec, Modified Tamiya, Tamiya/Okami and Open Class (trikes).

Race payout certificates and engraved plaques awarded by race director Tony "Tamiya" Papagna. Class winners are regularly posted to the Fastrax Raceway web site .

Rent-A-Dragster
If you do not own a drag car, or if you don’t own any slot cars for that matter, $7 covers you bracket entry fee, car and controller! Couldn’t be better!!

Vintage Model Racers of America
Fastrax Raceway works together with Slot Car Raceway in Santa Rosa, Ca. to support and promote the VMRA. For more information about classic model slot car racing please visit the VMRA web site.

George Russell's	3340 "D" San Pablo Dam Rd. San Pablo, Ca. 94806 Phone: (510) 222-2012 Fax: (510) 222-2214 Email: FXGEORGE@aol.com Click Here For Directions